Crosby® 1017626 Anchor Shackle, 18 ton Load, 1-1/4 in, 1.38 in Screw Pin, 2.03 in Opening, Hot Dip Galvanized
Item #BC016956

Crosby® Anchor Shackle, Series: G-209A, 18 ton, 1-1/4 in, 1.38 in Pin Dia, Screw Pin, 4.69 in Inner Length, 3-1/4 in Inner Width, 2.03 in Opening, 3 in Eye Outer Size, 8-1/4 in Overall Length, 6.16 in Overall Width, Forged Alloy Steel Body, Alloy Steel Pin, Hot Dip Galvanized
  • Forged alloy steel - quenched and tempered, with alloy pins
  • Working load limit permanently shown on every shackle
  • Shackles can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds or other certification
  • Approved for use at -40 to 204 deg C
  • Meets or exceeds all requirements of ASME B30.26 including identification, ductility, design factor, proof load and temperature requirements
  • Importantly, these shackles meet other critical performance requirements including fatigue life, impact properties and material traceability, not addressed by ASME B30.26
  • Capacities 2 - 21 metric tons
  • Meets performance requirements of grade 8 shackles
  • Load rated
  • +/-0.25 in L tolerance
Body MaterialForged Alloy Steel
Eye Outer Size3 in
FinishHot Dip Galvanized
Inner Length4.69 in
Inner Width3-1/4 in
Load Capacity18 ton
Opening Size2.03 in
Overall Length8-1/4 in
Overall Width6.16 in
Pin Diameter1.38 in
Pin MaterialAlloy Steel
Pin TypeScrew
SeriesG-209A
Size1-1/4 in