JET® 354028 Geared Head Bench Drill Press, 1 - 1-1/2 hp, 220 V, 3 Phase, 60 Hz, 20 in Swing, 15-3/4 x 19-3/4 in Table
Item #BC237726

JET® Bench Drill Press, Geared Head, 20 in Swing, MT-3 Spindle Taper, 5-1/8 in Spindle Travel, 130, 260, 420, 840, 535, 1070, 1745, 3480 rpm Spindle Speed, 8 Spindle Speed, 35-5/8 in Spindle to Table Distance, 10 in Spindle to Column Distance, 15-3/4 x 19-3/4 in Table, 350 lb Table Load, 45 deg Table Tilt, 24 x 22 in Base, 3-15/16 in Column Dia, 1 - 1-1/2 hp, 220 V, 3 Phase, 60 Hz, 4.2 A, 24 in L x 22 in W x 72 in H
  • Fiber and steel gears, which do not require an oil bath, allow for easier speed changes
  • Safety latch to prevent head dropping when unclamped
  • Adjustable taper bearings mounted in the end of the quill
  • Head and table rotates 360 deg around column
  • Drill head and table can be raised and lowered
  • Helical gears for smear, quiet operation
  • Quick-release drill ejector
  • English or metric depth gauge
  • Machined, T-slotted base plate
  • 3-15/16 in steel column
Spindle TaperMT-3
Spindle Travel5-1/8 in
TypeGeared Head
Table Tilt45 deg
Amperage Rating4.2 A
Spindle to Column Distance10 in
Table Load Capacity350 lb
Dimensions24 in L x 22 in W x 72 in H
Base Dimensions24 x 22 in
Voltage Rating220 V, 3 Phase, 60 Hz
Horsepower1 - 1-1/2 hp
Swing20 in
Spindle Speed130, 260, 420, 840, 535, 1070, 1745, 3480 rpm
Number of Spindle Speeds8
Table Size15-3/4 x 19-3/4 in
Column Diameter3-15/16 in
Spindle to Table Distance35-5/8 in
Warranty2 Years