Starrett® 16499 Band Saw Blade Coil Stock, 3/4 in x 0.032 in, 100 ft Coil, Carbide Blade
Item #BC423477

Starrett® Band Saw Blade Coil Stock, 3/4 in Blade Width, 0.032 in Blade Thickness, 100 ft Coil Length, Carbide Blade, Tooth Form: Continuous
  • Coarse grit is applicable for faster cutting of thick materials or metals
  • Finer grit is applicable on thin materials and fine ƒ??finishing
  • Minimum machine wheel diameter of 24 in (600mm) is recommended for continuous band
  • Smaller diameters tend to increase fatigue and reduce blade life
  • Use widest applicable blade for straight cutting
  • 30% reductions in cut radius can be achieved using grit blades instead of standard blades
  • Coolants are needed for most metal cutting and should be considered for glass and ceramics
  • Start cuts at lower speeds and gradually increase until the required performance is achieved
  • Metal cutting - a fine, stringy strip indicates the correct feed and band speed
  • Increase the life of the blade by turning the blade inside-out from time to time
Blade Width3/4 in
Blade Thickness0.032 in
Blade MaterialCarbide
Coil Length100 ft
Tooth FormContinuous