CM® M656AG Anchor Shackle, 18 ton Load, 1-1/4 in, 1-3/8 in Screw Pin, 2.031 in Opening, Galvanized
Item #BC433832

CM® Anchor Shackle, 18 ton, 1-1/4 in, 1-3/8 in Pin Dia, Screw Pin, 4.688 in Inner Length, 2-7/8 in Inner Width, 2.031 in Opening, 3-1/4 in Eye Outer Size, Alloy Steel Body, Alloy Steel Pin, Galvanized Finish
  • Screw pin anchor/chain shackles allow quick and easy removal of the screw pin and can be useful in applications where the shackle is frequently removed, but not so much in applications where the pin is subject to torque or twisting.
  • Made of special bar quality (SBQ) steel having fine grain, reduced sulfur and phosphorus
  • Shackles show major deformation before failure
  • Working load limit and traceability codes shown as permanent markings on body
  • All shackles have alloy quenched and tempered pins
  • Anchor shackles can be side loaded or used for multiple connections
  • Special products engineering available to fit your special lifting, tie down and pulling needs
  • 5:1 design factor
Size1-1/4 in
FinishGalvanized
Load Capacity18 ton
Body MaterialAlloy Steel
Pin TypeScrew
Inner Length4.688 in
Opening Size2.031 in
Pin Diameter1-3/8 in
Eye Outer Size3-1/4 in
Pin MaterialAlloy Steel
Inner Width2-7/8 in