TPI® LPI® HLA12-480360-7.5-24 Hazardous Location Fan Forced Unit Heater, 9.7A, 7.5kW, 3 Phase, 480V
TPI® LPI® Hazardous Location Fan Forced Unit Heater, Hazardous Location Fan Forced Unit Heater Item, 580 cfm at 24 ft Air Flow, 9.7A, 25600 BtuH Output, Powder Coated Epoxy Paint Housing, 14 ga. Steel Housing, Power Rating: 7.5kW, 21" Overall Depth, 22-1/2" Overall Height, 17-3/4" Overall Width, 3 Phase, Standards: ETL Listed, 480V Voltage
- Designed for rugged industrial applications in hazardous locations where the possibility of explosion or fire exists due to the presence of certain flammable gases, vapors, powdered metals or dust
- Permanently sealed, liquid to air, finned tube heat exchanger core
- Ethylene Glycol to water mixture used as a heat transfer fluid in the heater core, providing -45°C (-49°F) freeze damage protection
- High-performance electric motor driven fan blows air across finned tubes to effect uniform heat transfer and area heat distribution
- Manual reset capillary type limit provides high temperature regulation and is rated for 6000 cycles of service
- Stainless steel and aluminum pressure relief valve for overpressure
- A back-up contactor is included for additional protection
- 14 ga. steel cabinet powder coated epoxy paint finish contains heater core, motor, and fan assembly
- Narrow gap safety fan guard shields all moving parts
- Adjustable louvers allow directional control of air
- Copper conductor wires enclosed in rigid metal conduits carry all electrical power
- Box lugs furnished for field connections within approved enclosure
- Flexible mounting kits allow unit to be mounted on a pipe, overhead structure, or wall
- 8 ft. mounting height
- 24V control voltage, 41.4°F temperature rise