JET® 321469 Engine Lathe With ACU-RITE 200S DRO, 14 in Swing Over Bed, 7-5/8 in Swing Over Cross Slide, 7-1/2 hp
JET® Engine Lathe, Series: ZX, 14 in Swing Over Bed, 7-5/8 in Swing Over Cross Slide, 40 in Distance Between Centers, 13-3/8 in Bed Width, MT-4 Tailstock Taper, MT-7 (MT-5) Spindle, 42 - 1800 rpm Spindle Speed, 12 Spindle Speed, 9 in Cross Travel, 5 in Tailstock Spindle Travel, 36-9/16 in Carriage Travel, 5-1/8 in Compound Travel, 0.0006 - 0.0365 in Maximum Cross Feed Rate per Revolution, 0.0015 - 0.0913 in Maximum Longitudinal Feed Rate per Revolution, 7-1/2 hp, 230/460 V, 3 Phase, 96 x 44 x 66 in
- 3-1/8 in bore spindle is supported by two tapered and one ball bearings
- Chrome molybdenum headstock gears are hardened, ground and shaved
- Universal gear box allows inch, metric, diametric and module pitch threads, no change gears required
- Carriage features one shot lubrication and turcite-B on bed sliding surfaces
- T-slotted compound slide featuring four-way tool post
- One piece cast iron base absorbs vibration allowing heavier cuts
- High quality ANSI Class 50 wear resistant cast iron bed ways are hardened and ground
- Removable gap allows large diameter work
- Five position automatic carriage stop increases productivity
- Attractive chrome levers, dials and knobs complete this impressive package