JET® 690141 Vertical Milling Machine With 3-Axis ACU-RITE 200S DRO (Quill), X, Y and Z-Axis Powerfeeds, 3 hp
Item #BC881302

JET® Milling Machine, Vertical, Series: JTM-4VS, 9 in L x 49 in W Table, 34 in Longitudinal Travel, 12 in Cross Travel, 14-1/2 in Knee Travel, 13-3/8 in Ram Travel, 60 - 4200 rpm Spindle Speed, Variable Spindle Speed, 5 in Spindle Travel, R-8 Spindle Taper, 3-3/8 in Quill Dia, 17-1/2 in Spindle to Table Distance, 660 lb Table Load, 3 T-Slots, 5/8 in T-Slot, 90 deg R and L, 45 deg F and B Tilting Angle, 3 hp, 230/460 V, 3 Phase, 66 in L x 63 in W x 85 in H
  • 1/8 - 7/8 collet capacity
  • 0.0015 - 0.003 - 0.006 quill down feed rates (IPR)
  • 2-1/2 in T-slot center
  • 28-3/4 in table longitudinal travel with Powerfeed
  • 4-1/2 in to 19 in spindle to column distance
  • Certified Meehanite® castings
  • Precision bored and honed milling head
  • Large diameter quill is chromed
  • High precision Class 7 spindle bearing
  • Chrome plated motor shaft with lower bearing support
Number of Spindle SpeedsVariable
Cross Travel12 in
TypeVertical
SeriesJTM-4VS
Longitudinal Travel34 in
Spindle Travel5 in
Tilting Angle90 deg R and L, 45 deg F and B
Horsepower3 hp
Table Size9 in L x 49 in W
Voltage Rating230/460 V, 3 Phase
Knee Travel14-1/2 in
Number of T-Slots3
Ram Travel13-3/8 in
Table Load Capacity660 lb
Dimensions66 in L x 63 in W x 85 in H
Spindle TaperR-8
Quill Diameter3-3/8 in
Spindle to Table Distance17-1/2 in
T-Slot Size5/8 in
Spindle Speed60 - 4200 rpm
Warranty2 Years